在fluent中自動顯示最大和最小值

在運行case文件時,有時候需要監(jiān)視溫度,壓力,紊流動能/強度,粘度等的最大最小值。

生成*.scm文件

然后在solve-execute 輸入f rff *.scm或者de cff l *.scm,設置好when 類型,觀察計算面板可以看到最大/最小值列出。

參數定義如下:(把下面copy生成*.scm)

(define param)
; param = velocity-magnitude, for velocity magnitude ;
; param = x-velocity, for x-velocity ;
; param = stream-function, for stream-function ;
; param = pressure, for static-pressure ;
; param = total-pressure, for total-pressure ;
; param = temperature, for temperature ;
; param = total-temperature, for total-temperature ;
; param = turb-kinectic-energy, for turbulence kinetic energy ;
; param = turb-intensity, for turbulence intensity ;
; param = viscosiy-ratio, for turbulence-viscosity ratio ;
(set! param "temperature")

; 改變temperature為別的參數即可;
(define list)
(define max-param-pair)
(define max-param)
(define min-param-pair)
(define min-param)
(set! list (%fill-node-values param))
(set! max-param-pair (list-ref list 0))
(set! max-param (cdr max-param-pair))
(set! min-param-pair (list-ref list 1))
(set! min-param (cdr min-param-pair))
(format "Maximum ~a = ~a\n" param max-param)
(format "Mimimum ~a = ~a\n" param min-param)